Menvier Security TS510 Instrukcje Operacyjne Pobierz pdf (Strona 19)

Forcing The SD1+ to Tone / Pulse Dial

Pulse Dialling: This is the older format and is sometimes referred to as Loop Disconnect/LD. Tone

Dialling: This is the modern format and sometimes referred to as Multiple Frequency/MF. Any or all of

the telephone numbers can be selected to override the automatic format selection and be

forced into dialling the number in one of the above formats if required.

Before entering the telephone number 0181 234 5678 in the example below, press the B key to

select “Pulse Dialling” (

) or press the C key to select “Tone Dialling” ( ).

Ensure that the SD1+ is initialised and the display is showing

“

” (see page 4).

Press [ and the unit will display “ ”.

Press 1 for telephone number 1.

1 to 4 will select numbers 1, 2, 3 or 4.

0 to D selects phrases 0, A, B, C or D (see page 12).

The display will alternate between telephone No. 1 and the

current number (Blank if it has not been programmed).

If a telephone number is already programmed, this may

be deleted by pressing the

key.

Press the B key once to select “Pulse Dialling” ( ).

Pressing the key will select “Tone Dialling” ( ).

Type in the first phone number 0181 234 5678 and press [.

Repeat for telephone number 2, 3 & 4 as required.

When finished, press ] to return to the ready prompt.

If the SD1+ is NOT forced to pulse or tone dial, it will

automatically select the correct dialling format.

OR 0-D

[

TEL NO 1

BLANK

018112

345678

ENT 1-4

2345678*

OR 0-D

READY

]

[

READY

SD1+

????

ENT 1-4

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Komentarze do niniejszej Instrukcji

Brak uwag

Menvier Security TS510 Instrukcje Operacyjne Strona 19

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Menvier Security TS510