Menvier Security TS510 Instrukcje Operacyjne Pobierz pdf (Strona 15)

Changing Your Passcode Type

The SD1+ requires a passcode to be entered to allow access to the

program menus. This passcode is normally 4 digits (

), but

can be changed to 6 digits (

). The default user passcode is

1234. If the passcode is changed from 4 to 6 digits, the last two

digits of the code will default to (00) i.e. 1234 will now become 1234

00.

Ensure that the SD1+ is initialised and the display is showing

“

” (see page 4).

Press 5 and the display will show “ ”.

Press [ and the display will show the code type option that is

currently programmed i.e. “

”.

Scroll through the other 3 passcode options “

”, “ ” and “ ”, by pressing the

key.

Note: Do not use the following passcode types: 4 digits

followed by enter (

), or 6 digits followed by

enter (

). These are reserved for future use

Press [ to accept the option displayed and return to “ ”.

Programmable Output

The SD1+ has an output that can be programmed to activate

under certain conditions. These conditions are: active when the

SD1+ has been triggered (

), active when the SD1+ has been

acknowledged (

) and, active when the SD1+ has dialled

all numbers and has not been acknowledged (

Ensure that the SD1+ is initialised and the display is showing

“

” (see page 4)”.

Press 6 and the display will show “ ”.

Press [ and the display will show the output type that is currently

programmed i.e. “

”.

If required, the other 2 output types “ ”, and

" can be scrolled through by pressing the key.

Press [ to accept the option displayed and return to “ ”.

6 Digit Code

C,TYPE-

READY

SD1+

????

4, CODE

6, CODE

4+E, CODE

6+E, CODE

READY

[

4 Digit Code

4 Digit Code + ENT

6 Digit Code + ENT

OUTPUT-

READY

SD1+

????

ACTIVE

SUCCESS

FAILED

READY

[

Has Been Triggered

Has Been Acknowledged

Failed to Communicate

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Komentarze do niniejszej Instrukcji

Brak uwag

Menvier Security TS510 Instrukcje Operacyjne Strona 15

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Menvier Security TS510