Menvier Security TS2500 Instrukcja Użytkownika Pobierz pdf (Strona 27)

User Menu 2 Initiate Remote Service Call

User menu 2

Select option :-

SYSTEM OPEN

18:10 Sun 01 JAN

User menu 2

Start call back

01811234567

Call No.1 Office

ENT

ENT ENT

? ? ? ?

ENT

=DialNo.1

=DialNo.2

=DialNo.3

= Dial this number

to start call back

SYSTEM OPEN

18:10 Sun 01 JAN

If your alarm system is fitted with a modem, it

is possible for an authorised user to initiate an

upload sequence to a remote site (normally

the alarm company or central station).

Once the Communication link is

established, the remote site can read and

write data from the control panel. This

feature is only compatible with Menvier

Lineload software version 2.1 or above.

Only select this option when requested

by your alarm company. If this option is

selected without authorisation from the

alarm company the modem may not

connect with the remote site.

1. At the remote keypad enter your

passcode then press [ENT] twice to

select user menu 2.

2. Press [A] followed by [ENT] to select the

start call back option.

3. Pressing [1] - [3] will display the remote

site(s) telephone number(s). You will be

advised by your alarm company as to

which number to select. If the number is

not listed, press [B] and enter the

telephone number required.

4. When the display shows the required

telephone number press [ENT] to start

the call back sequence.

5. The system will automatically return to its

original state.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

Komentarze do niniejszej Instrukcji

Brak uwag

Menvier Security TS2500 Instrukcja Użytkownika Strona 27

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Menvier Security TS2500