Menvier Security TS510 Instrukcja Instalacji Pobierz pdf (Strona 8)

8 INS154-4

Failure to observe the following precautions regarding the battery could lead to the

danger of heating, ignition or explosion:

• Do not throw into a fire

• Do not heat

• Do not over-charge

• Do not reverse charge

• Do not short-circuit

• Do not disassemble

• Replace only with the same or

equivalent type

 Always observe local regulations when disposing of a battery.

 Plastic bags can suffocate - always dispose of packaging carefully.

4. Technical Specification

Environmental

Volume

Azura 360, Tempest:

109dB Peak at 1m (A Weighting, 90°)

Odyssey 1E, 2E, 3E & 4E:

109dB Peak at 1m (A Weighting, 90°)

Odyssey 1, 2, 3 & 4:

115dB Peak at 1m (A Weighting, 90°)

Cut-Off Time:

≤15 minutes

Waterproof Coating: Conformal

Operating Temperature:

-25°C (-13°F) to +55°C (+131°F)

Storage Temperature:

-25°C (-13°F) to +60°C (+140°F)

EMC Environment: Residential / Commercial /

Light Industrial / Industrial

Electrical

Supply Voltage: 12VDC (nominal)

Current Drain (typical at 12VDC)

Quiescent: 15mA

Strobe: 110mA

Sounder

Azura 360, Tempest: 300mA

Odyssey 1E, 2E, 3E & 4E: 300mA

Odyssey 1, 2, 3 & 4: 425mA

Standby Battery

Type: NiMh Stack

Voltage: 7.2VDC (nominal)

Capacity: 320mAh

Flash Tube: 1Ws

Flash Rate: 1Hz (typical)*

†

Discharge Time (≤

≤≤

≤60VDC): ≤180 seconds

Comfort LEDs

Brightness: 100mcd (typical)

Flash Rate (tamper secure): 1Hz alternating (typical)

* The flash rate will reduce to 0.125Hz after flashing for one hour (1 flash every 8

seconds). This is a software feature to reduce power consumption and cannot be

disabled.

†The flash rate may reduce to 0.5Hz for supply voltages less than 12V

DC.

1 2 3 4 5 6 7 8 9 10 11 12

Komentarze do niniejszej Instrukcji

Brak uwag

Menvier Security TS510 Instrukcja Instalacji Strona 8

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Menvier Security TS510