Menvier Security TS400 Instrukcja Obsługi Pobierz pdf (Strona 23)

Program Zones (key

)

The TSD402 zones may be programmed so that they perform different functions. The zones

types are as follows:

Night (N) - Zones 1-5 may be programmed as a Night zone, this type of

zone will only generate a full alarm when activated during a set

condition. If during a full alarm condition the speech dialler Alarm

channel is programmed to report, it will activate and send the

Alarm message.

Access (A) - Zones 1 and 2 may be programmed as an Access zone, this

type of zone is automatically isolated during the entry/exit

procedure to allow a "walk through" route for the user. Once the

system is full set the Access circuit responds as a Night circuit. If

an Access zone is armed during a part-set (HOME) condition it

will start the entry timer if activated.

Key switch (S) - Zone 3 may be programmed as a Keyswitch zone, this type of

zone will set the system when active (zone open) and unset the

system when healthy (zone closed). The Keyswitch zone

functionality may be further programmed to either full set (AWAY)

or part-set (HOME) the system (see System Options).

Fire (F) - Zone 4 may be programmed as a Fire zone, this type of zone is

monitored at all times, when activated a distinctive internal

sounder tone is generated and the external sounder is pulsed. If

during a fire alarm condition the speech dialler Fire channel is

programmed to report, it activates and sends the Fire message.

P.A. (P) - Zone 5 may be programmed as a Personal Attack (P.A.) zone,

this type of zone is monitored at all times, when activated a full

alarm is generated. If during a PA alarm the speech dialler P.A.

channel is programmed to report, it will activate and send the

P.A. message.

Final Exit (E or A) - The Final Exit zone is the last detector that is activated when

leaving the protected premises and the first detector to be

activated when re-entering the protected premises. This zone

may programmed to respond as follows:

Exit (E) When programmed as Exit the Final Exit zone will

generate an interrupted tone when opened during the Exit

procedure.

Access (A) When programmed as Access the Final Exit zone

will remain silent when opened during the Exit procedure. The

feature is useful if a PIR is used for the Final Exit zone, as it will

normally be activated several times before leaving the building.

TSD402 Installation Manual Programming

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Brak uwag

Menvier Security TS400 Instrukcja Obsługi Strona 23